ENERGY-SAVING BALL MILL

Ball mills are used for dry and wet grinding of different materials such as cement materials, cement, lime, ceramic materials, silicate sand and so on.

Scope of application:

Cement, coal, power plant desulfurization, metallurgy, chemical industry, non-metallic mineral, construction material, ceramics.

Product Description：

Ball mill design consists of feeding part, discharging part, rotary part, transmission part (reducer, small gear, motors, electrical control) and other major parts. Hollow shaft is steel castings, and the liner is detachable. Rotary gear is processed by casting hobbling. The cylinder is lined wear-resistant liner plate with good resistance to wear. This machine works stably.

Applied material :

Rock, gravel, different kinds of ore, fireclay, slag and other hard materials.

Feature：

1. Low operation and maintenance cost.

2. High operating reliability.

3. Wide applicability and Great yield.

4. Smaller built-up space in comparison with mills seated on trunnion bearings.

5. Easy operation, stable& reliable performance.

6. Oil mist lubrication device guarantees the lubrication of all gears.
Technical parameter：

Model	Cylinder speed (r/min)	Balls load (t)	Feeding size (mm)	Discharge size (mm)	Capacity (t/h)	Motor Power (kw)	Weight (t)
Φ900×1800	36	1.5	≤20	0.075-0.89	0.65-2	18.5	4.6
Φ900×3000	36	2.7	≤20	0.075-0.89	1.1-3.5	22	5.6
Φ1200×2400	36	3	≤25	0.075-0.6	2.2-4.8	30	10.5
Φ1200×3000	36	3.5	≤25	0.074-0.4	2.7-5	37	11.8
Φ1200×4500	32.4	5	≤25	0.074-0.4	4-7.5	55	13.8
Φ1500×3000	29.7	7.5	≤25	0.074-0.4	4.3-8	75	15
Φ1500×3500	29.7	7.5	≤25	0.074-0.4	4.5-9	75	16.5
Φ1500×4500	27	11	≤25	0.074-0.4	6-12	90	18
Φ1500×5700	28	12	≤25	0.074-0.4	7-15	130	22
Φ1830×3000	25.4	11	≤25	0.074-0.4	6.5-12	130	28
Φ1830×3600	25.4	13	≤25	0.074-0.4	8-13	130	30
Φ1830×4500	25.4	15	≤25	0.074-0.4	10-18	155	32
Φ1830×6500	24.1	21	≤25	0.074-0.4	14-26	210	35
Φ1830×7000	25	23	≤25	0.074-0.4	15-28	245	37
Φ2100×3000	23.7	15	≤25	0.074-0.4	9-16	180	39
Φ2100×3600	23.7	18	≤25	0.074-0.4	10-19	210	41
Φ2100×4500	23.7	24	≤25	0.074-0.4	13-24	245	55
Φ2100×7000	23.7	26	≤25	0.074-0.4	20-37	280	50
Φ2200×4500	21.5	27	≤25	0.074-0.4	14-26	280	60
Φ2200×7000	21.7	35	≤25	0.074-0.4	22-41	380	63
Φ2400×3600	21	23	≤25	0.074-0.4	14-25	320	69
Φ2400×4500	21	27	≤25	0.074-0.4	17-32	380	80
Φ2400×7000	20.9	42	≤25	0.074-0.4	26-49	480	90
Φ2700×3600	20.7	33	≤25	0.074-0.4	19-32	380	94
Φ2700×4000	20.7	35	≤25	0.074-0.4	20-36	380	98
Φ2700×4500	20.7	38	≤25	0.074-0.4	21-40	480	116
Φ2700×7000	20.7	55	≤25	0.074-0.4	33-62	630	185
Φ3200×4500	19	56	≤25	0.074-0.4	35-68	800	132
Φ3200×7000	18	73	≤25	0.074-0.4	47-78	1250	185
Φ3600×4500	17	76	≤25	0.074-0.4	49-82	1250	185
Φ3600×6000	17	100	≤25	0.074-0.4	52-96	1400	235
Φ3600×8500	17	130	≤25	0.074-0.4	70-130	1800	270
Φ3800×6500	16.7	121	≤25	0.074-0.4	73-137	1800	277
Φ3800×8500	16.7	158	≤25	0.074-0.4	82-143	2000	305
Φ4000×6000	16.7	135	≤25	0.074-0.4	90-160	2000	315