The magnetic separator is suitable for wet magnetic separation of magnetite, pyrrhotite, roasted ore, ilmenite and other materials with a particle size below 3mm, and is also used for iron removal of coal, non-metallic minerals, building materials and other materials. The magnetic system of the magnetic separator is made of high-quality ferrite material or a composite with rare earth magnetic steel, and the average magnetic induction intensity of the cylinder surface is 100-600mT.

Product Introduction：

The magnetic separator is suitable for wet magnetic separation of magnetite, pyrrhotite, roasted ore, ilmenite and other materials with a particle size of less than 3mm. It is also used for iron removal of coal, non-metallic minerals, building materials and other materials. The magnetic system of the magnetic separator is made of high-quality ferrite materials or composited with rare earth magnets, and the average magnetic induction intensity of the cylinder surface is 100-600mT. According to user needs, magnetic separators with different surface strengths such as downstream, semi-countercurrent and countercurrent types can be provided. This product has the advantages of simple structure, large processing capacity, convenient operation and easy maintenance. The magnetic separator is a device that uses the different magnetic coefficients of various minerals to separate the magnetic substances in the mixture with the help of magnetic force and mechanical force. According to different operation modes, it can be divided into dry magnetic separators and wet magnetic separators. 

Product Advantages：

1.Wide application areas

Used for iron removal in coal mines, foundry sand, refractory materials and other industries.

Good magnetic separation performance

Compared with conventional magnetic separation equipment, the magnetic separator adds high-performance permanent magnets to the magnetic system structure design to ensure that the magnetic properties are not lost under high flow conditions.

2.High product quality

Used in the ceramic industry to remove iron mixed in porcelain mud and improve the quality of ceramic products

3.Save resources

Used for separation of raw ore that is not fully reduced in closed-circuit roasting of hematite reduction, and return it for re-burning

How it works：

After the slurry flows into the tank through the feed box, the ore particles enter the feeding area of the tank in a loose state under the action of the water flow of the feed water pipe. Under the action of the magnetic field, the magnetic ore particles gather to form "magnetic clusters" or "magnetic chains". The "magnetic clusters" or "magnetic chains" are affected by the magnetic force in the slurry and move toward the magnetic poles and are adsorbed on the cylinder. Since the polarity of the magnetic poles is arranged alternately along the rotation direction of the cylinder and is fixed during operation, the "magnetic clusters" or "magnetic chains" produce magnetic stirring due to the alternation of magnetic poles when the cylinder rotates. Non-magnetic minerals such as gangue mixed in the "magnetic clusters" or "magnetic chains" fall off during the turning, and the "magnetic clusters" or "magnetic chains" finally adsorbed on the surface of the cylinder are the concentrate. The concentrate moves with the cylinder to the weak magnetic force at the edge of the magnetic system, and is unloaded into the concentrate tank under the action of the flushing water flow sprayed from the unloading water pipe. If it is a full magnetic roller, the unloading is carried out by a brush roller. Non-magnetic or weakly magnetic minerals are left in the slurry and discharged from the tank with the slurry, which is the tailings.